Pimapen Nirvana Series
Main profiles are of 80 mm in width.
Its 6-cubicle profiles offer a high level of heat and sound insulation.
Nirvana profiles possess a low heat transmission value (*Uf=0,95 W/m²K). It allows the use of three-glass units of 44 mm (Ug=0,6-0,7 W/m²K). The heat transmission value of the Nirvana series windows applied with this type of glass will be Uw=0,78 W/m²K and, provides an outstanding level of heat insulation (*: calculated value).
Due to the gray and clack stainless elastic gaskets used in the system, it provides a high level of air, water, sound and dust insulation.
Its three-gasket system including the outer, inner and medium gaskets contributes to the heat and sound insulation and, protects the equipment used for the sash opening against corrosion making them long lasting.
It is a series with a specially designed meeting rail profile providing high resistance against the wind load at upper floors.
Its sash profile is of self-drainage offering an aesthetic look. The self-drainage section is not included in the measurement of 80 mm. The profile measurement will be 90 mm with this section added.
It increases the glass section due to the optimized door profile height allowing spacious locations.
Pimapen Albatros Sliding Series
It is possible to produce solutions answering to all kinds of requirements due to 6 types of frame profiles contained in the system.
It is possible to carry out sliding window and door applications with two, three, four, five, six sashes.
Since the movable slash in the inner position for the fixed comportment frame profile, you can use it ergonomically and reliably.
Thus, the applications for outside screen-blinds operate more productively.
There is no vertical profile when the sashes are opened in the applications with 90º edges due to its specially designed movable edge joint profiles and, thus it offers more spacious visibility.
Its tightness profiles well designed, tightness components and brush gaskets provide a high level of impermeability.
A frame profile with self-casing system provides a visual integrity in the inner surface and the joints between the wall and the joinery.
Due to the frame profiles used as meeting rails, it is possible to form fixed compartments below or above the sliding part.
It is possible to form secure compartments without using glazing beads due to the fixed comportment adaptor profile defined in the system.
It is possible to form sliding screens without using any additional rail due to its built-in screen rail frame profile.
In addition to white, there are laminated profiles with 17 different colors and patterns.
Due to its specially designed fluted and oval edge rails, it allows eye-catching, aesthetic joints between the profile and the glass.
There are rails allowing the use of single-glass, double-glass and panels of 4-20-24-30 mm in width.
AZ
EN
RU
